10.5281/zenodo.1100617
Jun Li
Wenze Wang
Zhanggui Hu
Yongwei Zhu
Dunwen Zuo
Effect Of Chemical Additive On Fixed Abrasive Polishing Of Lbo Crystal With Non-Water Based Slurry
Zenodo
2015
Non-water based slurry
LBO crystal
Fixed abrasive
polishing
Surface roughness.
2015-04-03
en
Journal article
https://zenodo.org/record/1100617
10.5281/zenodo.1100616
10001187
Creative Commons Attribution 4.0
Open Access
<p>Non-water based fixed abrasive polishing was adopted<br>
to manufacture LBO crystal for nano precision surface quality because<br>
of its deliquescent. Ethyl alcohol was selected as the non-water based<br>
slurry solvent and ethanediamine, lactic acid, hydrogen peroxide was<br>
added in the slurry as a chemical additive, respectively. Effect of<br>
different additives with non-water based slurry on material removal<br>
rate, surface topography, microscopic appearances, and surface<br>
roughness were investigated in fixed abrasive polishing of LBO<br>
crystal. The results show the best surface quality of LBO crystal with<br>
surface roughness Sa 8.2 nm and small damages was obtained by<br>
non-water based slurry with lactic acid. Non-water based fixed<br>
abrasive polishing can achieve nano precision surface quality of LBO<br>
crystal with high material removal.</p>
{"references": ["C. T. Chen, Y. C. Wu, A. D. Jiang, B. C. Wu, G. M. You, R. K. Li and S. J.\nLin \"New nonlinear-optical crystal: LiB3O5.\" J. Opt. Sco. Am., (B6), pp.\n616-621. (1989).", "Z. Hu, Y. Zhao, Y. Yue and X. Yu \"Large LBO crystal growth at 2\nkg-level.\" Journal of Crystal Growth, vol. 335, (1), pp. 133-137. (2011).", "Z. G. Hu and Y. C. Wu \" Review of the research on the nonlinear optical\ncrystal: LiB3O5.\" Mater. China, vol. 29, (8), pp. 12-17. (2010).", "D. Liao, R. Xie, J. Hou, X. Chen and B. Zhong \"A polishing process for\nnonlinear optical crystal flats based on an annular polyurethane pad.\"\nAppl. Surf. Sci., vol. 258, (22), pp. 8552-8557. (2012).", "W. Huang, S. Tamilmani, C. Anderson, and S. Raghavan \"Material\nremoval and articulate generation during abrasion of copper films using a\nfixed abrasive pad.\" IEEE Trans. Semicon. Manu,. vol.17, pp. 525-530.\n(2004).", "B. Gillman and S. Jacobs \"Bound-abrasive polishers for optical glass.\"\nAppl. Opt., vol. 37, pp. 3498-3505. (1998).", "X. Wang and X. Zhang \"Theoretical study on removal rate and surface\nroughness in grinding a RB-SiC mirror with a fixed abrasive.\" Appl. opt.,\nvol. 48, pp.904-910. (2009).", "B.-J. Cho, H.-M. Kim, R. Manivannan, D.-J. Moon and J.-G. Park \"On the\nmechanism of material removal by fixed abrasive lapping of various glass\nsubstrates.\" Wear, vol. 302. (2013).", "J. Li, P. Gao, Y. W. Zhu, B. Li, Y. L. Sun and D. W. Zuo \"Research on\nsubsurface damage after abrasives and fixed-abrasive lapping of K9\nglass.\" Key Eng. Mater., vol. 487, pp. 253-256. (2011).\n[10] J. Li, B. Li, Z. Hu, Y. Zhu and D. Zuo \"Optimization of FAP in Nano\nMachining Process.\" Integrated Ferroelectrics, vol. 152, (1), pp. 43-50.\n(2014).\n[11] J. Li, B. Li, Z. Hu, Y. Zhu and D. Zuo \"Optimization of Fixed Abrasive\nPolishing Slurry for LiB3O5 Crystal.\" J Chin Ceram Soc, vol. 41, (6), pp.\n789-796.(in Chinese). (2013).\n[12] S. Wang, Y. Liu, X. Niu and B. Tan \"Slurry and processing technique of\nCLBO crystal.\" Trans. Nonferrous Met. Soc. china, vol. 16, (Supplement\n2), pp. s692~s695. (2006).\n[13] Y. Tian, Z. Zhong, S. Lai, Y. Ang \"Development of fixed abrasive\nchemical mechanical polishing process for glass disk substrates.\" Int J\nAdv Manuf Technol, vol. 68, (5-8), pp. 993-1000.(2013).\n[14] J. Li, Y. Liu, Y. Pan, X. Lu \"Chemical roles on Cu-Slurry interface during\ncopper chemical mechanical planarization.\" Appl Surf Sci, vol. 293, pp.\n287-292.(2014).\n[15] J. Li, Y. W. Zhu, D. W. Zuo, K. Lin and M. Li \"Fixed abrasive lapping and\npolishing of hard brittle materials.\" Key Eng. Mater., vol. 426-427, pp.\n589-592. (2010).\n[16] J. Li, Y. W. Zhu, D. W. Zuo, Y. Zhu and C. T. Chen \"Optimization of\npolishing with Taguchi method for LBO crystal in CMP.\" J. Mater. Sci.\nTechnol., vol. 25, (5), pp. 703-707. (2009)."]}