10.5061/DRYAD.SBCC2FR2R
Schaich, Tobias
0000-0001-9636-4308
University of Cambridge
Morsman, Trevor
BT Group (United Kingdom)
Al Rawi, Anas
BT Group (United Kingdom)
Payne, Mike
0000-0002-5250-8549
University of Cambridge
Dielectric induced surface wave radiation loss
Dryad
dataset
2019
Surface Wave
Office of the Royal Society
https://ror.org/04v9gtz82
IF170002
Office of the Royal Society
https://ror.org/04v9gtz82
INF/PHD/180021
2019-12-17T00:00:00Z
2019-12-17T00:00:00Z
en
94292 bytes
7
CC0 1.0 Universal (CC0 1.0) Public Domain Dedication
Data and source code for the article "Dielectric Induced Surface Wave
Radiation Loss" submitted to the Proceedings of the Royal Society A.
These raw data show the received power of a surface wave launched onto a
20 metre single twisted pair at different heights above the ground. The
cable is a Dropwire 11 of the British Cable Company containing a single
twisted pair (0.5mm diameter annealed copper, 0.93mm over insulation
(Polyethylene)) but with the steel strength members removed. Data sets
were measured using a signal generator and spectrum analyser. Launching
was achieved with horn launchers of depth 5cm and cross section of 5 cm.
The cable was suspended at 1.5 metres above ground for the first
measurement. Then is was suspended at 10cm above ground and the mid point
of the cable was brought to within 10cm (straight cable), 2 cm and 0.5 cm
of the ground. Furthermore, deposited are Ansys HFSS simulations'
data for the transmitted surface wave at 10 and 15 GHz for different
dielectric perturbations brought into close vicinity of the surface wave.
The length of the perturbation was varied. Finally Matlab source code used
to obtain the results of the presented model in the paper is deposited.